Under Cover Fabworks, LLC

Product Search

Steel Rear Bumper with Tire Carrier for Jeep YJ & TJ

Heavy-Duty Rear Bumper for your Jeep Wrangler!

More details

$1,200.00 tax excl.


This new TJ rear bumper and tire carrier is fabricated from carbon steel to produce a very strong product.  The total weight of this product is about 108lbs. 

The bumper sub-structure and lower frame tie-in plates are fabricated from 3/16" carbon steel plate with a 1/4" thick receiver tube.  The d-ring mounts are 3/4" steel plate. This weldment is fully MIG welded.

The bumper body is made from 3/16" steel.  It is formed with large radius tooling to maintain the integrity of the material.  The body is then MIG welded on the inside and the outside.

Our tire carrier hinge spindle is machined to accept 1 3/8" Timken trailer bearings.  The hub is sealed to the elements with a grease seal on the bottom and an o-ringed aluminum cap at the top.  The swing-arm is fabricaed from 1 3/4" x .120" wall DOM tube.  The wheel mounting plate and backspacing-adjustment slide are bent from 3/16" steel that is fully gusset and welded to the swing-arm.  This provides the ajustment necessary for almost any wheel, stock or aftermarket.  The wheel plate is pre-cut for both 5x4.5" and 5x5" lug patterns.  Studs will be installed at the stock YJ & TJ 5x4.5" pattern.  The tire carrier will hold up to 37" tall tires.

A feature that is unique to the UCF tire carrier is the latching method.  The swing-arm is permanently attached to the tailgate bracket with an adjustable linkage that allows them to open together.  Opening the tailgate is now a very easy one-handed operation.  The tailgate bracket has a tab on the top that can be used to mount a CB antenna. 

*This product currently requires a 1" body lift.




Shopping Cart