UCF Steel Transfer Case Skid for Jeep YJ ('87-'95) – Extra-Clearance

Steel YJ transfer case skid with extra clearance.

Put this steel skid in place of the factory transfer case skid on your '87–'95 YJ for 1 1/2" more ground clearance. We recommend running it with at least 1" of body lift.

Fits manual (standard) and automatic transmissions.

Built to take a beating

• Fabricated from 3/16" thick carbon steel plate (upgradable to 1/4" plate)
• Designed in 3D CAD software, laser cut and bent on a CNC press brake for a perfect fit every time
• Reinforced in the middle from one side to the other with a stiffening channel/transmission mount
• Front and rear edges are ramped to increase strength and help you slide over obstacles
• Total height of the system: about 2"

Comes with a 3/16" steel adapter plate for the front set of mounting holes. It ships pre-attached to the skid with 3/8" low-profile bolts. Remove the adapter and paint it before final install.

Body lift: We recommend at least 1" of body lift to run this skid.

What's included: Skid plate with the 3/16" steel front adapter plate. Mounting hardware is not included. You will need (6) 1 1/2" long x 1/2"-13tpi hex bolts with flat washers.

Finish: shipped UPS in bare steel.

Fitment: confirmed vehicles

• Jeep: Wrangler YJ 1987–1995 (fits automatic and manual transmissions)

Not sure what fits your project? Choose your vehicle in the parts finder at the top of the page, or give us a call.

Install instructions: see the Attachments tab above, or download the UCF Transfer Case Skid Install Guide (PDF).