-Brands by Category

Reference: SK2XC

Brand: Under Cover Fabworks

Jeep NP-231 Novak Cable Shifter Assembly

Our goal at Novak was to simplify the shifting mechanism, at first for our many customers performing engine and transmission conversions, but then for the many running stock powertrains unhappy with the shifting action, and the many situations where the complex linkage causes the transfer case to pop out of its range or mode unexpectedly.

Reference: PN 8100

Brand: Under Cover Fabworks

JKS 1" Budget Motor Mount Lift - TJ or YJ

Lift your engine up out of the rocks for more clearance and better drivetrain angles while maintaining the factory motor mounts for smoother and quieter operation.

Reference: SM-SBB-2000

Brand: Under Cover Fabworks

Seat Belt Bung: Summit Machine seat belt bung for 2” tube. Uses factory TJ screw

Summit Machine seat belt bung for 2" tube. Uses factory TJ screw

Reference: SK3X-R

Brand: Under Cover Fabworks

Jeep NP-241OR "Rubicon" Novak Cable Shifter Assembly

Our goal at Novak was to simplify the shifting mechanism, at first for our many customers performing engine and transmission conversions, but then for the many running stock powertrains unhappy with the shifting action, and the many situations where the complex linkage causes the transfer case to pop out of its range or mode unexpectedly.

Reference: PN 9904

Brand: Under Cover Fabworks

JKS 1.25" TJ Body Lift

Raise your body up out of the rocks to make room for high-clearance skid plates and larger tires

Reference: ORI-SFK

Brand: Under Cover Fabworks

ORI Single-Fill Charge Kit

The economy fill kit

Brand: Under Cover Fabworks

Tube Adapter (Bung): For 3/4”-16 rod end, RH/LH thread available, fits 1” ID, 1-1/4” hex

For 3/4"-16 rod end, RH/LH thread available, fits 1" ID, 1-1/4" hex

Reference: ORI-DFK

Brand: Under Cover Fabworks

ORI Dual-Fill Charge Kit

Save time filling your struts

Reference: ORI-STX

Brand: Under Cover Fabworks

ORI STX Strut (8"-20" Travel)

Stability... Bank On It!

Brand: Under Cover Fabworks

Tube Adapter (Bung): For 7/8”-18 rod end, RH/LH thread available, fits 1” ID, 1-1/4” hex

For 7/8"-18 rod end, RH/LH thread available, fits 1" ID, 1-1/4" hex

Brand: Under Cover Fabworks

Tube Adapter (Bung): For 1-1/4”-12 rod end, RH/LH thread available, fits 1-1/2” ID, 1-3/4” hex

For 1-1/4"-12 rod end, RH/LH thread available, fits 1-1/2" ID, 1-3/4" hex