Reference: UCF059
Brand: Under Cover Fabworks
UCF LOPRO ('03-'06 TJ & LJ) Transmission Mount
Drop your transfer case almost 1" down into your skid plate to reduce driveline angles or run a tummy-tuck skid without a body lift.
Armor and upgrades for the 1997-2006 Jeep Wrangler TJ and LJ Unlimited. Shop skid plates, bumpers, rocker and corner guards, trail doors, roll cages, roll cage brackets, axle swap kits and more.
Do TJ parts fit an LJ? Some do and some don't. Each product's Fitment section lists its confirmed vehicles, or you can choose your vehicle in the parts finder at the top of the page.
Do '97–'02 and '03–'06 TJ parts interchange? Not always. Transfer case skids and LOPRO mounts are different for those years, so choose the one listed for your year.
We add new TJ and LJ parts regularly. Questions about fitment? Call us at (334) 797-7113.

Replace the factory skid with a stronger, ramped design that slides over rocks instead of catching on them. Pick the clearance for your build, in steel or aluminum, and pair it with our LOPRO mount for even more room.
There are 107 products.
Active filters
Reference: UCF059
Brand: Under Cover Fabworks
Drop your transfer case almost 1" down into your skid plate to reduce driveline angles or run a tummy-tuck skid without a body lift.
Reference: UCF077
Brand: Under Cover Fabworks
Build your own full under-belly protection, from a budget setup to the thickest armor we make.
Reference: UCF394
Brand: Under Cover Fabworks
Mount a Wilwood master cylinder in place of the factory e-brake bracket, a big help in rear disc brake axle swaps.
Reference: UCF012
Brand: Under Cover Fabworks
Tuck your transfer case up and out of the rocks with this extra-clearance skid plate.
Reference: UCF508
Brand: Under Cover Fabworks
Lightweight 1/8" aluminum trail doors that give hard-door owners the half-door look and feel without breaking the bank.
Reference: UCF165
Brand: Under Cover Fabworks
Protect your windshield frame from future damage, or hide the evidence of past carnage.
Reference: UCF055
Brand: Under Cover Fabworks
Keep your oil pan and transmission out of the rocks with a 1/4" aluminum skid that weighs only 11 lbs.
Reference: UCF052
Brand: Under Cover Fabworks
Tuck your transfer case as high as it will go with our ultra high-clearance skid plate.
Reference: UCF056
Brand: Under Cover Fabworks
Keep your oil pan and transmission out of the rocks with a heavy-duty 1/4" carbon steel skid plate.
Reference: UCF078
Brand: Under Cover Fabworks
Drop your transfer case almost 3/4" down into your skid plate to reduce driveline angles or run a tummy-tuck skid without a body lift.
Reference: UCF242
Brand: Under Cover Fabworks
A 9 lb aluminum front bumper that saves serious weight over other rock bumpers.
Reference: UCF053
Brand: Under Cover Fabworks
Tuck your transfer case as high as it will go with our ultra high-clearance skid plate.
Reference: UCF439
Brand: Under Cover Fabworks
A-pillar mounts that bolt to the floor and make your next sport cage project simple.
Reference: UCF645
Brand: Under Cover Fabworks
Replacement flat rubber bushing for the UCF LOPRO Mount.
Reference: UCF072
Brand: Under Cover Fabworks
Replacement round rubber bushing for the UCF LOPRO Mount.
Reference: UCF010
Brand: Under Cover Fabworks
Protect your transfer case and gain clearance over the factory skid, with no body lift needed.
Reference: UCF028
Brand: Under Cover Fabworks
Tuck your transfer case up and out of the rocks with this extra-clearance skid plate.
Reference: UCF037
Brand: Under Cover Fabworks
Protect your transfer case and gain clearance over the factory skid, with no body lift needed.
Reference: UCF107
Brand: Under Cover Fabworks
Tuck and protect your gas tank with this ultra-light aluminum skid plate; requires a 1" or greater body lift.
Reference: UCF256
Brand: Under Cover Fabworks
A strong, lightweight aluminum and steel rear bumper that weighs about 30 lbs less than a traditional rear bumper and tire carrier.
Reference: UCF062
Brand: Under Cover Fabworks
Keep your oil pan and transmission out of the rocks with a 1/4" aluminum skid that weighs only 10 lbs.
Reference: UCF110
Brand: Under Cover Fabworks
Correct your suspension geometry, gain ground clearance and skip skid plate modifications with this long-arm bracket kit.
Reference: UCF050
Brand: Under Cover Fabworks
Tuck your transfer case as high as it will go with our ultra high-clearance skid plate.
Reference: UCF063
Brand: Under Cover Fabworks
Keep your oil pan and transmission out of the rocks with a heavy-duty 1/4" carbon steel skid plate.
Reference: SK2XC
Brand: Novak Conversions
Novak's cable shifter for NP231 and NP242 transfer cases: precise, crisp shifts in place of the sloppy factory linkage.
Reference: UCF117
Brand: Under Cover Fabworks
Tuck and protect your gas tank with this robust steel skid plate; requires a 1" or greater body lift.
Reference: UCF051
Brand: Under Cover Fabworks
Tuck your transfer case as high as it will go with our ultra high-clearance skid plate.
Reference: UCF438
Brand: Under Cover Fabworks
A dedicated crawler front bumper that gains all the clearance possible while keeping the winch tucked down low and as far back as possible.
Reference: UCF054
Brand: Under Cover Fabworks
A lightweight 1/4" aluminum winch plate that gives your winch a solid mounting platform.
Reference: SK3X-R
Brand: Novak Conversions
Novak's 241OR cable shifter replaces the factory linkage for smoother, stronger shifts in your TJ or LJ.
Reference: UCF041
Brand: Under Cover Fabworks
Protect your transfer case and gain clearance over the factory skid, with no body lift needed.
Reference: UCF251
Brand: Under Cover Fabworks
Our proven transfer case skid body without the transmission mount, so you can build your own mount for an engine or transmission swap.
Reference: UCF468
Brand: Under Cover Fabworks
A 7.5 lb aluminum front bumper that saves serious weight over other rock bumpers.
Reference: UCF445
Brand: Under Cover Fabworks
A bolt-on DOM winch hoop that adds style and function up front.
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper control arm mount with this beast.
Reference: UCF455
Brand: Under Cover Fabworks
Mount a 12" single-row LED light bar just above your winch fairlead.