619620083708
Space your transfer case skid down 1" to cure driveline vibration, or to run a high-clearance skid now and put off the expensive parts.
A low-cost fix with lots of uses.
These spacers drop your transfer case skid plate 1". Use them to avoid an SYE and CV driveshaft after a suspension lift, or pair them with a high-clearance skid plate to put off those same expensive parts until you're ready.
Construction
What's included: One pair of identical spacers, one for the driver side and one for the passenger side. Hardware is not included.
Fitment: confirmed vehicles
Not sure what fits your project? Choose your vehicle in the parts finder at the top of the page, or give us a call.
Install instructions: see the Attachments tab above, or download the UCF TJ & LJ Skid Spacer Install Guide (PDF).
Not sure which skid you need? Our Tummy Tuck Guide compares the clearance and body lift for every YJ, TJ and LJ skid.
Specific References
Reference: UCF059
Brand: Under Cover Fabworks
Drop your transfer case almost 1" down into your skid plate to reduce driveline angles or run a tummy-tuck skid without a body lift.
Reference: UCF012
Brand: Under Cover Fabworks
Tuck your transfer case up and out of the rocks with this extra-clearance skid plate.
Reference: UCF052
Brand: Under Cover Fabworks
Tuck your transfer case as high as it will go with our ultra high-clearance skid plate.
Reference: UCF251
Brand: Under Cover Fabworks
Our proven transfer case skid body without the transmission mount, so you can build your own mount for an engine or transmission swap.
Reference: UCF077
Brand: Under Cover Fabworks
Build your own full under-belly protection, from a budget setup to the thickest armor we make.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Space your transfer case skid down 1" to cure driveline vibration, or to run a high-clearance skid now and put off the expensive parts.
