UCF Transfer Case Skid for '97-'02 TJ (Ultra High-Clearance)(Carbon Steel)

HD Transfer Case Skid Plate for '97-'02 Jeep Wrangler TJ (Ultra High-Clearance)(Carbon Steel Plate)

Fits '97-'02 Jeep Wrangler TJs with standard or automatic transmissions.

Fabricated from 3/16" thick carbon steel plate (with optional upgrade to 1/4" plate).  The parts were designed in 3D CAD software and laser cut then bent on a CNC press brake for a perfect fit every time.

The UCF Transfer Case Skid Plate is reinforced in the middle of the skid from one side to the other with a stiffening channel/transmission mount.  The front and rear edges are ramped to increase strength and aid in sliding over obstacles.  This product will increase ground clearance by about 3" over the factory skid plate.  The total height of this system is about 1".

We recommend that you have at least 1" of body lift OR a UCF LOPRO Mount to install this skid plate with no body/transfer case vibration issues.  It can also be installed without a body lift if you clearance the tub in area where the transfer case would normally touch.  Shipped UPS in bare steel.

Mounting hardware not included.  '97-'02 TJs will require (6) 1 1/2" long x 1/2"-13tpi hex bolts with flat washers.