Banner
619620082701
Replace those weak, sagging hinges with new HD pivots from UCF!
The UCF Heavy-Duty JK Tailgate Hinge Set is fabricated from 3/16" steel plate that is formed to create the strongest possible design. The hinge base is designed to be much stronger than the factory design. They are fully MIG welded. The pivots are designed with high-grade bolts and delrin bushings to prevent rattle and noise. These hinges are shipped bare and will need to be painted.
Reference: UCF648
Brand: Under Cover Fabworks
Reinforce your tailgate hinges to spread the load onto your body tub more uniformly.
Reference: UCF078
Brand: Under Cover Fabworks
Adjust the height of your LOPRO mount to accommodate custom transfer case skid installs.
Reference: UCF042
Brand: Under Cover Fabworks
Our Pinion Guard will save your yoke time and again
Reference: UCF649
Brand: Under Cover Fabworks
Our new heavy duty tailgate hinges completely replace the factory hinges with upgraded units. These are bushed with Delrin bushings that will provide many years of maintenance free service. No greasing required.
Reference: UCF606
Brand: Under Cover Fabworks
Easily mount a Double-Ended Steering Ram with an absolutely bulletproof system.
Reference: UCF571
Brand: Under Cover Fabworks
The UCF Optima Battery Box will keep your battery secure and keep you safe.
Reference: UCF164
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF450
Brand: Under Cover Fabworks
This product will make mounting you hydraulic assist ram easy.
Reference: UCF480
Brand: Under Cover Fabworks
UCF Trailer Stake Pocket D-Rings are a versatile way to strap a load.
Reference: UCF437
Brand: Under Cover Fabworks
Dress-up your QD steering wheel conversion with this aluminum cover plate!
Reference: UCF633
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF145
Brand: Under Cover Fabworks
Order your ARB Compressor Bracket for Jeep JK today and move that compressor to its most suitable location
Reference: UCF650
Brand: Under Cover Fabworks
Our new Jeep JL Heavy-Duty Tire Carrier Bracket will safely support a 37 or 38" tire on a 17" plus diameter wheel.
Reference: UCF604
Brand: Under Cover Fabworks
Use these plates to mount a removable winch hoop on your TJ or LJ.
Reference: UCF394
Brand: Under Cover Fabworks
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
Reference: UCF629
Brand: Under Cover Fabworks
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Replace those weak, sagging hinges with new HD pivots from UCF!
