![](https://undercoverfab.com/535-large_default/jeep-tj-parking-brake-bracket-kit.jpg)
Reference: UCF635
Brand: Under Cover Fabworks
UCF 4-Bolt Offset Flange for 1-3/4 Inch Round Tube
Make a cage tube removable with these flanges!
Banner
619620082787
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes. It will plumb in-line with your rear brake hydraulic line and let you use the factory emergency brake handle as a line lock. It was designed for use with "Wilwood 260-6089 .750" Bore Compact Master Cylinder" but it may work with others. The bracket kit will ship welded but bare of any finish. It is attached to the bottom of the tub with factory hardware. You must supply pivot hardware and the hardware to attach the master cylinder.
Reference: UCF635
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF539
Brand: Under Cover Fabworks
Relocate your factory locker pumps to a UCF transfer case skid plate with this bracket.
Reference: UCF670
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF634
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF650
Brand: Under Cover Fabworks
Our new Jeep JL Heavy-Duty Tire Carrier Bracket will safely support a 37 or 38" tire on a 17" plus diameter wheel.
Reference: UCF145
Brand: Under Cover Fabworks
Order your ARB Compressor Bracket for Jeep JK today and move that compressor to its most suitable location
Reference: UCF633
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF576
Brand: Under Cover Fabworks
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
Reference: UCF450
Brand: Under Cover Fabworks
This product will make mounting you hydraulic assist ram easy.
Reference: UCF480
Brand: Under Cover Fabworks
UCF Trailer Stake Pocket D-Rings are a versatile way to strap a load.
Reference: UCF604
Brand: Under Cover Fabworks
Use these plates to mount a removable winch hoop on your TJ or LJ.
Reference: UCF042
Brand: Under Cover Fabworks
Our Pinion Guard will save your yoke time and again
Reference: UCF629
Brand: Under Cover Fabworks
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
Reference: UCF649
Brand: Under Cover Fabworks
Our new heavy duty tailgate hinges completely replace the factory hinges with upgraded units. These are bushed with Delrin bushings that will provide many years of maintenance free service. No greasing required.
Reference: UCF164
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF078
Brand: Under Cover Fabworks
Adjust the height of your LOPRO mount to accommodate custom transfer case skid installs.
Reference: UCF645
Brand: Under Cover Fabworks
Replacement Flat Bushing for the UCF LOPRO Mount
Reference: UCF646
Brand: Under Cover Fabworks
Lose your engine skid hardware kit or purchase a used skid without the hardware?
Reference: UCF428
Brand: Under Cover Fabworks
Used for 4-link bars and super heavy-duty sliders.
Reference: UCF078
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF145
Brand: Under Cover Fabworks
Order your ARB Compressor Bracket for Jeep JK today and move that compressor to its most suitable location
Reference: UCF077
Brand: Under Cover Fabworks
UCF's custom-configurable system to provide full under-belly coverage
Brand: Summit Machine
For 7/8"-18 rod end, RH/LH thread available, fits 1" ID, 1-1/4" hex
Reference: UCF437
Brand: Under Cover Fabworks
Dress-up your QD steering wheel conversion with this aluminum cover plate!
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.