Banner
619620082688
Protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing.
The UCF JK Inner-C Gusset Kit is fabricated from 1/4" carbon steel and formed to the contours of the stock inner-C.
They will help protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing. These gussets fit the contours of the stock inner-C and can be installed with very little effort without removing the axle from the vehicle.
You will receive (4) pieces total. Enough for (1) front axle housing.
Reference: UCF646
Brand: Under Cover Fabworks
Lose your engine skid hardware kit or purchase a used skid without the hardware?
Reference: UCF576
Brand: Under Cover Fabworks
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
Reference: UCF652
Brand: Under Cover Fabworks
Our new Jeep JL Inner Tire Carrier Reinforcement Bracket is fabricated from 1/4" 6061-T651 aluminum plate for the ultimate in strength and performance.
Reference: UCF449
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF394
Brand: Under Cover Fabworks
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
Reference: UCF145
Brand: Under Cover Fabworks
Order your ARB Compressor Bracket for Jeep JK today and move that compressor to its most suitable location
Reference: UCF629
Brand: Under Cover Fabworks
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
Reference: UCF250
Brand: Under Cover Fabworks
Replace those weak, sagging hinges with new HD pivots from UCF!
Reference: UCF651
Brand: Under Cover Fabworks
Our new Jeep JL Outer Tire Carrier Reinforcement Bracket is fabricated from 1/4" 6061-T651 aluminum plate for the ultimate in strength and performance
Reference: UCF632
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF669
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF633
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF078
Brand: Under Cover Fabworks
Adjust the height of your LOPRO mount to accommodate custom transfer case skid installs.
Reference: UCF631
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF606
Brand: Under Cover Fabworks
Easily mount a Double-Ended Steering Ram with an absolutely bulletproof system.
Reference: UCF539
Brand: Under Cover Fabworks
Relocate your factory locker pumps to a UCF transfer case skid plate with this bracket.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing.
