Banner
619620084071
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
UCF Universal Winch Fairlead Mount
This bracket is fabricated from 3/16" carbon steel or 3/16" 6061-T6 aluminum plate. It is welded inside and out and sanded smooth for a finished appearance. The winch mounting pattern in the bottom of the bracket is 4 1/2" x 10" for standard Warn-style winches. Quantity is one bracket. Shipped bare of any finish.
Specific References
Reference: UCF631
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF521
Brand: Under Cover Fabworks
Protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing.
Reference: UCF634
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF046
Brand: Under Cover Fabworks
Recovery Points that will take Serious Abuse
Reference: UCF394
Brand: Under Cover Fabworks
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
Reference: UCF650
Brand: Under Cover Fabworks
Our new Jeep JL Heavy-Duty Tire Carrier Bracket will safely support a 37 or 38" tire on a 17" plus diameter wheel.
Reference: UCF670
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF078
Brand: Under Cover Fabworks
Adjust the height of your LOPRO mount to accommodate custom transfer case skid installs.
Reference: UCF250
Brand: Under Cover Fabworks
Replace those weak, sagging hinges with new HD pivots from UCF!
Reference: UCF606
Brand: Under Cover Fabworks
Easily mount a Double-Ended Steering Ram with an absolutely bulletproof system.
Reference: UCF576
Brand: Under Cover Fabworks
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
Reference: UCF648
Brand: Under Cover Fabworks
Reinforce your tailgate hinges to spread the load onto your body tub more uniformly.
Reference: UCF632
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF437
Brand: Under Cover Fabworks
Dress-up your QD steering wheel conversion with this aluminum cover plate!
Reference: UCF669
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF164
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
