Banner
619620082718
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
The UCF Fill-Valve Protector for ORI STX Struts is fabricated from 16" carbon steel sheet and folded on a brake to give the parts rigidity. We have also dimple-die formed the parts to enhance appearance and strength. The protectors are sold in pairs and come bare of any finish. Stainless band clamps are included.
Reference: UCF606
Brand: Under Cover Fabworks
Easily mount a Double-Ended Steering Ram with an absolutely bulletproof system.
Reference: UCF480
Brand: Under Cover Fabworks
UCF Trailer Stake Pocket D-Rings are a versatile way to strap a load.
Reference: UCF604
Brand: Under Cover Fabworks
Use these plates to mount a removable winch hoop on your TJ or LJ.
Reference: UCF046
Brand: Under Cover Fabworks
Recovery Points that will take Serious Abuse
Reference: UCF450
Brand: Under Cover Fabworks
This product will make mounting you hydraulic assist ram easy.
Reference: UCF646
Brand: Under Cover Fabworks
Lose your engine skid hardware kit or purchase a used skid without the hardware?
Reference: UCF042
Brand: Under Cover Fabworks
Our Pinion Guard will save your yoke time and again
Reference: UCF449
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF394
Brand: Under Cover Fabworks
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
Reference: UCF521
Brand: Under Cover Fabworks
Protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing.
Reference: UCF437
Brand: Under Cover Fabworks
Dress-up your QD steering wheel conversion with this aluminum cover plate!
Reference: UCF650
Brand: Under Cover Fabworks
Our new Jeep JL Heavy-Duty Tire Carrier Bracket will safely support a 37 or 38" tire on a 17" plus diameter wheel.
Reference: UCF078
Brand: Under Cover Fabworks
Adjust the height of your LOPRO mount to accommodate custom transfer case skid installs.
Reference: UCF529
Brand: Under Cover Fabworks
Replace those weak, sagging hinges with new HD pivots from UCF!
Reference: UCF651
Brand: Under Cover Fabworks
Our new Jeep JL Outer Tire Carrier Reinforcement Bracket is fabricated from 1/4" 6061-T651 aluminum plate for the ultimate in strength and performance
Reference: UCF652
Brand: Under Cover Fabworks
Our new Jeep JL Inner Tire Carrier Reinforcement Bracket is fabricated from 1/4" 6061-T651 aluminum plate for the ultimate in strength and performance.
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
