
Reference: UCF042
Brand: Under Cover Fabworks
UCF Corporate 14 Bolt Pinion Guard
Our Pinion Guard will save your yoke time and again
Banner
619620082695
Replace those weak, sagging hinges with new HD pivots from UCF!
The UCF Heavy-Duty TJ Tailgate Hinge Set was designed to be compatible with corner guards that don't have hinge cut-outs that weaken the design. The late model ('03-'06) TJ tub has dished areas under the hinges to allow them to open. These new hinges don't require the dish. They sit flush with the corner guards and allow them to be sandwiched between the hinge and the tub. This greatly increases the strength of the tailgate. The UCF hinges are also compatible for use without corner armor. These hinges are fabricated from 3/16" steel plate that is formed to create the strongest possible design. They are fully MIG welded. The pivots are designed with high-grade bolts and delrin bushings to prevent rattle and noise. They also include new mounting hardware. These hinges are shipped bare and will need to be painted.
Reference: UCF042
Brand: Under Cover Fabworks
Our Pinion Guard will save your yoke time and again
Reference: UCF604
Brand: Under Cover Fabworks
Use these plates to mount a removable winch hoop on your TJ or LJ.
Reference: UCF632
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF046
Brand: Under Cover Fabworks
Recovery Points that will take Serious Abuse
Reference: UCF394
Brand: Under Cover Fabworks
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
Reference: UCF633
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF649
Brand: Under Cover Fabworks
Our new heavy duty tailgate hinges completely replace the factory hinges with upgraded units. These are bushed with Delrin bushings that will provide many years of maintenance free service. No greasing required.
Reference: UCF646
Brand: Under Cover Fabworks
Lose your engine skid hardware kit or purchase a used skid without the hardware?
Reference: UCF437
Brand: Under Cover Fabworks
Dress-up your QD steering wheel conversion with this aluminum cover plate!
Reference: UCF576
Brand: Under Cover Fabworks
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
Reference: UCF521
Brand: Under Cover Fabworks
Protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing.
Reference: UCF634
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF648
Brand: Under Cover Fabworks
Reinforce your tailgate hinges to spread the load onto your body tub more uniformly.
Reference: UCF529
Brand: Under Cover Fabworks
Replace those weak, sagging hinges with new HD pivots from UCF!
Reference: UCF480
Brand: Under Cover Fabworks
UCF Trailer Stake Pocket D-Rings are a versatile way to strap a load.
Reference: UCF635
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Replace those weak, sagging hinges with new HD pivots from UCF!