UCF Highline Front Tube Fenders for Jeep TJ/LJ

4" Flare Width Highline Tube Fenders for your TJ or LJ are shipped assembled and fully welded and sanded. 

Each side is assembled from (2) pieces of 1/8" steel plate and (1) 1 1/2" x .120" wall DOM tube.  They bolt to the tub in 4 places at the firewall, to the inner fender in 6 places and to the grill.

They were designed in 3D modeling software to follow the contours of the hood and still provide protection against trees and limbs. 

The contour of the hood is offset 6" to the outside of the flare (flare is only 4" wide at the back) to protect it from the tires in compression or articulation or other obstacles.

Fender clearance is increased by about 4 1/2” from the best clearance spots in the factory fender.

The fender is 1 1/2" tall from the grill to the curve at the rear of the fender.

You will have to modify your factory fenders to install these new rock fenders, however you will maintain full engine bay protection unlike some other tube fenders.

You will be required to trim about 3 1/4” off the bottom side of your hood to install these parts.