Reference: UCF073
Brand: Under Cover Fabworks
UCF Shaved 14 Bolt Heavy-Duty Differential Cover (Welded)
1/4" steel armor for your shaved GM 14 Bolt full-floater axle, shipped fully welded and ready for paint.
619620083562
The same 1/4" steel shaved GM 14 Bolt full-floater cover as a weld-it-yourself kit. Save money if you have a welder.
DIY kit for 14 Bolts with the bottom bolt shaved.
Shave the bottom bolt off your GM 14 Bolt full-floater housing for more ground clearance, then weld up this differential cover kit to match. It has the same parts as our welded shaved cover and ships tack-welded.
This version of our 14 Bolt cover is for those who want to shave the bottom bolt from the housing. Removing the lower bolt gains you at least 3/4" of ground clearance, and much more if you haven't already shaved the housing flush with the stock cover. You're left with just over 1/2" of sealing surface on the lower portion of the ring.
Where to cut: the cover is designed for a housing shaved flat up to the top of the lowest bolt hole.
What you get
If your axle uses metric cover bolts, reuse your factory bolts.
This axle fills through the housing, so the cover has no fill plug.
Install tips
Fitment: any GM 14 Bolt full-floater (10.5") housing shaved flat up to the top of the lowest bolt hole. That includes 1973–2000 Chevy/GMC 3/4- and 1-ton pickups, 3/4-ton Suburbans and 3500 vans with the full-float 14 Bolt.
Not sure what you have? Choose your vehicle in the parts finder at the top of the page, or send us a photo of your axle and we'll help.
Ships tack-welded together, so you know you have the right parts and they fit. You finish the welding.
Install instructions: see the Attachments tab above, or download the UCF Differential Cover Install Guide (PDF).
Not sure which cover fits? See our Diff Cover Selection Guide.
Specific References
Reference: UCF073
Brand: Under Cover Fabworks
1/4" steel armor for your shaved GM 14 Bolt full-floater axle, shipped fully welded and ready for paint.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
UCF Shaved 14 Bolt Heavy-Duty Differential Cover (DIY Kit)
The same 1/4" steel shaved GM 14 Bolt full-floater cover as a weld-it-yourself kit. Save money if you have a welder.
* Required fields
Review sent
Your review cannot be sent
The same 1/4" steel shaved GM 14 Bolt full-floater cover as a weld-it-yourself kit. Save money if you have a welder.