Reference: UCF032
Brand: Under Cover Fabworks
UCF 14 Bolt Full Floater Disc Brake Brackets
Ditch the heavy drum brakes on your 14 Bolt full-floater and gain real stopping power.
619620083371
1/4" steel armor for your shaved GM 14 Bolt full-floater axle, shipped fully welded and ready for paint.
Welded cover for 14 Bolts with the bottom bolt shaved.
Shave the bottom bolt off your GM 14 Bolt full-floater housing, and this welded differential cover closes it back up with more ground clearance. Its steel shell replaces the thin factory cover and takes the hits.
This version of our 14 Bolt cover is for those who want to shave the bottom bolt from the housing. Removing the lower bolt gains you at least 3/4" of ground clearance, and much more if you haven't already shaved the housing flush with the stock cover. You're left with just over 1/2" of sealing surface on the lower portion of the ring.
Where to cut: the cover is designed for a housing shaved flat up to the top of the lowest bolt hole.
Built to take a beating
This axle fills through the housing, so the cover has no fill plug.
What's included: Fully welded cover and SAE mounting hardware. If your axle uses metric cover bolts, reuse your factory bolts.
Finish: ships as bare steel. Spray paint the outer surface before installing.
Fitment: any GM 14 Bolt full-floater (10.5") housing shaved flat up to the top of the lowest bolt hole. That includes 1973–2000 Chevy/GMC 3/4- and 1-ton pickups, 3/4-ton Suburbans and 3500 vans with the full-float 14 Bolt.
Not sure what you have? Choose your vehicle in the parts finder at the top of the page, or send us a photo of your axle and we'll help.
Install instructions: see the Attachments tab above, or download the UCF Differential Cover Install Guide (PDF).
Not sure which cover fits? See our Diff Cover Selection Guide.
Specific References
Reference: UCF032
Brand: Under Cover Fabworks
Ditch the heavy drum brakes on your 14 Bolt full-floater and gain real stopping power.
Reference: UCF676
Brand: Under Cover Fabworks
Two caliper mounts per side for your 14 Bolt full-floater: run cutting brakes, a separate parking brake, or extra stopping power.
Reference: UCF031
Brand: Under Cover Fabworks
A rock-solid upper link mount for your GM Corporate 14 Bolt. No welding to the housing required.
Reference: UCF042
Brand: Under Cover Fabworks
Cheap insurance that will save your 14 Bolt yoke time and again.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
UCF Shaved 14 Bolt Heavy-Duty Differential Cover (Welded)
1/4" steel armor for your shaved GM 14 Bolt full-floater axle, shipped fully welded and ready for paint.
* Required fields
Review sent
Your review cannot be sent
1/4" steel armor for your shaved GM 14 Bolt full-floater axle, shipped fully welded and ready for paint.