UCF TJ & LJ Roll-Cage Mount Kit (6 Bracket Sets)

Every UCF bracket for a standard roll cage in a TJ or LJ. All 6 bracket sets together, for $15 less than buying them separately.

What's included (one pair of each):

• A-pillar dash & floor mounts: driver and passenger side, with welded gussets and access holes for the dash speaker grilles; the lower plate bolts to the tub floor with (2) 1/2" bolts
• Upper windshield cage tie-in tabs: tie the cage into the top of the windshield frame, with holes to center a 1 3/4" tube so the upper door surrounds go back on correctly
• B-hoop mounting plates: formed to the floor profile, using all 4 bolt holes on each side
• C-pillar mounting plates: cut to fit the rear fender top, using 4 bolt holes on each side, with room to drill 2 more per side
• B-pillar lower seatbelt tabs: reuse the stock front seatbelts with the new cage
• C-pillar lower seatbelt tabs: reuse the stock rear seatbelts with the new cage

Mounts only. Roll-cage tubing and hardware are not included. The cage drawing shows where the brackets go (LJ cage shown).

Install notes: the seatbelt tabs need a 1/2" bolt in place of the factory hardware, and you may need to enlarge the hole in the factory belt assembly. Factory hardware can be reused on the upper windshield tabs.

Construction: laser cut from 3/16" steel plate.

Fitment: confirmed vehicles

• Jeep: Wrangler TJ 1997–2006 · Wrangler Unlimited LJ 2004–2006

Building a cage for a polycarbonate windshield instead of the factory one? Add the windshield support cage brackets.

Not sure what fits your project? Choose your vehicle in the parts finder at the top of the page, or give us a call.