![](https://undercoverfab.com/437-large_default/ucf-upper-link-inner-frame-brackets.jpg)
Reference: UCF143
Brand: Under Cover Fabworks
UCF Rear-Link Frame Bracket System
Rear Chassis-Side Link Mounting System for Four-Link Suspension
Banner
619620082404
Upper Chassis-Side Link Mounting System for Four-Link Suspension
The UCF Upper-Link Inner Frame Brackets were designed to allow you to easily mount your upper links to the inside surface of your frame rails. They allow you to drop an upper link on the frame side without removing the rear link bolt. The mounts are laser cut from 1/4" carbon steel plate. The pieces fit together to create and inner mounting width of just over 2 5/8". This allows for the use of flex joints such as the Currie Johnny Joint or 1 1/4" x 1" heim joints with high-misalignment spacers. 9/16" mounting holes are provided, but they can be oversized easily for larger bolt sizes. The mounts are 4 1/2" long and the center of the joints will be located 2 3/8" from the side of the frame. They mount the links at a 20 degree angle from the frame. The brackets are fully gusseted and will ship ready to weld onto your rig. They will be shipped bare of all finishes that would be destroyed by the welding process.
Reference: UCF143
Brand: Under Cover Fabworks
Rear Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF141
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF147
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Reference: UCF456
Brand: Under Cover Fabworks
Mount longer coilovers using these offset mounts.
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: UCF149
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF031
Brand: Under Cover Fabworks
Save hours of time building your custom 4-link suspension
Reference: UCF437
Brand: Under Cover Fabworks
Dress-up your QD steering wheel conversion with this aluminum cover plate!
Reference: UCF438
Brand: Under Cover Fabworks
This dedicated crawler front bumper will gain you all the clearance possible while keeping the winch tucked down low and as far back as possible.
Reference: UCF421
Brand: Under Cover Fabworks
Add strength, clean up the back of your Jeep frame, make room for rear wheelbase stretch and coil-over shocks.
Reference: UCF034
Brand: Under Cover Fabworks
Heavy Duty Diff Protection for your Wrangler
Reference: UCF142
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF428
Brand: Under Cover Fabworks
Used for 4-link bars and super heavy-duty sliders.
Upper Chassis-Side Link Mounting System for Four-Link Suspension