
Reference: UCF132
Brand: Under Cover Fabworks
UCF JK Front Lower Control Arm Bracket Skids
Protect your axle brackets from being mangled by rocks.
Banner
619620082596
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
The UCF Chassis Link Mounting System (Batwing) was designed to allow you to easily mount your lower links to a crossmember at the chassis side. It mounts to 1 3/4" OD round tube. The mount is laser cut from 5/16" carbon steel plate. It fits together like a puzzle with tabs and slots to create mounting points that are just over 2 5/8" wide. 5/8" mounting holes are provided, but they can be oversized easily for larger bolt sizes. The key feature that differentiates our Batwing from that of other off-road shops is that it provides a smooth transition from the skid plate to the mount by offsetting the suspension joints up a bit. The mount provides 8" of lateral seperation and 40 degrees of total angle between the joints.
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF144
Brand: Under Cover Fabworks
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF436
Brand: Under Cover Fabworks
Simplify your link suspension build with our line of ready-made link mounting brackets!
Reference: UCF142
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF147
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: UCF082
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF083
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Lower Chassis-Side Link Mounting System for Triangulated Four-Link