Banner
619620084323
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
The UCF In-line Link Tabs for Tube Chassis are laser-cut from 5/16" high-strength steel plate then formed on a CNC press brake. This design allows you to mount 1 1/4" heims with high-misalignment spacers to the chassis with a 3/4" bolt. Sold in pairs; each pair will allow you to mount a single link to the chassis. Order a pair today!
Reference: UCF081
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF149
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF152
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF456
Brand: Under Cover Fabworks
Mount longer coilovers using these offset mounts.
Reference: UCF142
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF436
Brand: Under Cover Fabworks
Simplify your link suspension build with our line of ready-made link mounting brackets!
Reference: UCF147
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Reference: UCF024
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF083
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF082
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF080
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
