619620082619
Four 5/16" steel tabs that mount your lower links to one axle at a 10 degree angle.
A 10 degree link tab kit for axle tubes.
If your lower links need 10 degrees at the axle, this weld-on tab kit gets you there. Pair it with a 2 5/8" wide flex joint and the 1/2" difference between the long and short tabs sets the angle.
What's included: (4) tabs, enough to mount the axle-side lower links on one axle.
Fitment: Universal — fits axle tubes up to 3 1/2" in diameter.
Specific References
Reference: UCF024
Brand: Under Cover Fabworks
Replace those weak, bent-up factory lower control arm mounts with something beefy that keeps your cam bolts.
Reference: UCF110
Brand: Under Cover Fabworks
Correct your suspension geometry, gain ground clearance and skip skid plate modifications with this long-arm bracket kit.
Reference: UCF083
Brand: Under Cover Fabworks
Four 5/16" steel tabs that mount your lower links to one axle at a 20 degree angle.
Reference: UCF151
Brand: Under Cover Fabworks
A 1/4" steel coil-over tab that mounts flat on top of your axle tube.
Reference: UCF654
Brand: Under Cover Fabworks
Bombproof in-line link tabs for mounting 1 1/4" heims to a 1 3/4" tube chassis.
Reference: UCF081
Brand: Under Cover Fabworks
A 5/16" steel axle-tube link tab for axle tubes up to 3 1/2" in diameter.
Reference: UCF150
Brand: Under Cover Fabworks
A 1/4" steel coil-over tab curved to fit 1 3/4" round tube.
Reference: UCF436
Brand: Under Cover Fabworks
An axle-side upper link mount with a 0 degree angle, for a 3-link front or a parallel 4-link rear.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Four 5/16" steel tabs that mount your lower links to one axle at a 10 degree angle.
