
Reference: UCF654
Brand: Under Cover Fabworks
UCF In-line Link Tabs for Tube Chassis
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Banner
619620082435
Rear Chassis-Side Link Mounting System for Four-Link Suspension
The UCF Rear-Link Frame Brackets were designed to allow you to easily mount your rear upper and lower links to your frame rails. The mounts are laser cut from 1/4" carbon steel plate. The pieces fit together to create and inner mounting width of just over 2 5/8". This allows for the use of flex joints such as the Currie Johnny Joint or 1 1/4" x 1" heim joints with high-misalignment spacers. 9/16" mounting holes are provided, but they can be oversized easily for larger bolt sizes. The mounts are 8" long and the center of the lower through holes are 2 1/4" below the bottom of the frame. The upper mount is 4 1/8" higher than the lower and located 3" inboard. The brackets are fully gusseted and will ship ready to weld onto your rig. They will be shipped bare of all finishes that would be destroyed by the welding process.
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF082
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Reference: UCF147
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Reference: UCF081
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF436
Brand: Under Cover Fabworks
Simplify your link suspension build with our line of ready-made link mounting brackets!
Reference: UCF152
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF080
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Rear Chassis-Side Link Mounting System for Four-Link Suspension