Banner
619620082428
Link Mounts for Axle Tubes
UCF Straight Link Tab We offer the UCF Straight Link Tab exclusively in 5/16" carbon steel plate. It is sized for axle tubes up to 3 1/2" in diameter and is 1 3/4" from the axle tube to the center of the mounting hole. All holes are sized at 9/16" (.5625") in diameter. Sold Individually. You will need (4) tabs to mount the axle side lower links to you axle tube.
Reference: UCF144
Brand: Under Cover Fabworks
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF147
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF152
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF456
Brand: Under Cover Fabworks
Mount longer coilovers using these offset mounts.
Reference: UCF024
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Link Mounts for Axle Tubes
