
Reference: UCF151
Brand: Under Cover Fabworks
UCF Flat-Bottom Coil-Over Tab
Coil-Over Shock Mounting Solutions
Banner
619620082602
Link Mounts for Axle Tubes
UCF 20 Degree Link Tab Kit We offer the UCF 20 Degree Link Tab Kit exclusively in 5/16" carbon steel plate. It is sized for axle tubes up to 3 1/2" in diameter and is 1 3/4" from the axle tube to the center of the mounting hole on the short side tab. The longer tab is 1" longer than the short tab to create the 20 degree angle when used with a 2 5/8" wide flex joint. All holes are sized at 9/16" (.5625") in diameter. Sold in kit form. You will receive (4) tabs. They will mount the lower axle side on you links to one axle.
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF141
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: UCF081
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF144
Brand: Under Cover Fabworks
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF147
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF143
Brand: Under Cover Fabworks
Rear Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF436
Brand: Under Cover Fabworks
Simplify your link suspension build with our line of ready-made link mounting brackets!
Reference: UCF456
Brand: Under Cover Fabworks
Mount longer coilovers using these offset mounts.
Reference: UCF142
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Link Mounts for Axle Tubes