
Reference: UCF144
Brand: Under Cover Fabworks
UCF Upper-Link Inner Frame Brackets
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Banner
619620082473
Lower Chassis-Side Link Mounting System for Four-Link Suspension
The UCF Lower-Link Frame Brackets were designed to allow you to easily mount your lower links to the bottom surface of your frame rails. The mounts are laser cut from 1/4" carbon steel plate. The pieces fit together to create and inner mounting width of just over 2 5/8". This allows for the use of flex joints such as the Currie Johnny Joint or 1 1/4" x 1" heim joints with high-misalignment spacers. 9/16" mounting holes are provided, but they can be oversized easily for larger bolt sizes. The mounts are 7 3/4" long and the center of the through holes are 2 1/4" below the bottom of the frame. The brackets are fully gusseted and will ship ready to weld onto your rig. They will be shipped bare of all finishes that would be destroyed by the welding process.
Reference: UCF144
Brand: Under Cover Fabworks
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF143
Brand: Under Cover Fabworks
Rear Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF024
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF152
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF141
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF080
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF436
Brand: Under Cover Fabworks
Simplify your link suspension build with our line of ready-made link mounting brackets!
Reference: UCF082
Brand: Under Cover Fabworks
Link Mounts for Axle Tubes
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Lower Chassis-Side Link Mounting System for Four-Link Suspension