Take 10% off UCF parts with code UCF10OFFFree UPS Ground on orders over $19910% off code UCF10OFF · Free Ground over $199
Dana 44 Differential Cover – Heavy-Duty Welded | UCF
  • Dana 44 Differential Cover – Heavy-Duty Welded | UCF
  • Dana 44 Differential Cover – Heavy-Duty Welded | UCF
  • Dana 44 Differential Cover – Heavy-Duty Welded | UCF
  • Dana 44 Differential Cover – Heavy-Duty Welded | UCF

UCF Dana 44 Heavy-Duty Differential Cover (Welded)

UCF022

619620083302

1/4" steel armor for your Dana 44 axle, shipped fully welded and ready for paint.

Shipping Weight 10.0 lbs
$133.00

Fits: Dana 44: JK rear (07–18), JK & TJ/LJ Rubicon front, TJ/LJ/CJ with Dana 44 rear, Commando, Scout II, 1966–79 Ford Bronco/F-100/F-150/F-250 front, 1994–01 Ram 1500 front. Not TTB, JL/JT or aluminum GC

Install: Bolt-on · about 1 hour · basic hand tools, scraper and a tube of Ultra Gray RTV
Order here and have a shop near you put it on: Find an installer ›

Size: sticks out about 3" from the housing · fill plug on the right side, at center height

Shipping weight: 10 lbs

Ships: Made in batches. In-stock parts ship in 1–3 business days; others almost always within 2 weeks.

10-year limited warranty on UCF-made parts · Shipping & warranty details

Made in the USA, in Alabama and Florida

Free UPS Ground shipping on orders over $199 (lower 48 states)


Quantity

Description

Welded cover for Dana 44 axles, front or rear.

This welded differential cover is for Dana 44 axles, front or rear, on the Dodge, Ford, International and Jeep models listed below, and it replaces the thin factory cover. It puts a steel shell between the rocks and your gears.

Built to take a beating

  • Body laser cut from 1/4" steel plate and folded into a single piece, with fewer seams and fewer weak spots
  • Welded to a 1/4" steel sealing ring
  • Professionally welded by experienced welders
  • Redesigned for a simpler, stronger assembly

What's included: Fully welded cover, fill plug and SAE mounting hardware. If your axle uses metric cover bolts, reuse your factory bolts.

Finish: ships as bare steel. Spray paint the outer surface before installing.

Fitment: confirmed vehicles

  • Dodge: Ram 1500 1994–2001 (4WD front)
  • Ford: Bronco 1971–1979 (front, not 1980+ TTB) · F-100 1966–1979 (4WD front) · F-150 1975–1979 (4WD front, not 1980+ TTB) · F-250 1966–1979 (4WD front, some have a Dana 60; not 1980+ TTB)
  • International: Scout II 1971–1980 (rear, and front on later trucks)
  • Jeep: CJ-5 1960–1983 (with Dana 44 rear, most 1976+ CJs have an AMC 20) · CJ-6 1966–1975 (with Dana 44 rear) · CJ-7 1986 (with Dana 44 rear, most CJ-7s have an AMC 20) · CJ-8 Scrambler 1981–1985 (with Dana 44 rear, most Scramblers have an AMC 20) · Jeepster Commando 1966–1973 (rear) · Wrangler JK 2007–2018 (rear) · Wrangler JK 2007–2018 (Rubicon only; front) · Wrangler JK Unlimited 2007–2018 (rear) · Wrangler JK Unlimited 2007–2018 (Rubicon only; front) · Wrangler TJ 1997–2006 (non-Rubicon; with Dana 44 rear, most have a Dana 35) · Wrangler TJ 2003–2006 (Rubicon only; front and rear) · Wrangler Unlimited LJ 2004–2006 (with Dana 44 rear, most LJs have it) · Wrangler Unlimited LJ 2004–2006 (Rubicon only; front)

Not for TTB (1980+ Ford twin-traction-beam) fronts.

Not for the aluminum-housing Grand Cherokee Dana 44.

Not sure what you have? Choose your vehicle in the parts finder at the top of the page, or send us a photo of your axle and we'll help.

Install instructions: see the Attachments tab above, or download the UCF Differential Cover Install Guide (PDF).

Not sure which cover fits? See our Diff Cover Selection Guide.

Product Details
UCF022

Data sheet

Fitment
Dana 44: JK rear (07–18), JK & TJ/LJ Rubicon front, TJ/LJ/CJ with Dana 44 rear, Commando, Scout II, 1966–79 Ford Bronco/F-100/F-150/F-250 front, 1994–01 Ram 1500 front. Not TTB, JL/JT or aluminum GC

Specific References

UPC
619620083302
You might also like
Comments (0)