• Banner

UCF Dana 44 Rear Truss System

UCF057

619620081636

Rating 

Save hours of time building your custom 4-link suspension

Shipping Weight 35.0 lbs
$330.00
Quantity

Description

UCF Dana 44 Rear Truss System

This is one of those parts that are almost required when building a custom link suspension on a Dana 44 rear axle.  It provides a rock-solid point to mount your upper suspensions links.  No more welding to cast steel housings.  Just install the diff cover, put the truss body in place on the tube and weld it all up.

This truss system will come with a Dana 44 Diff Cover and an extra tab that has to be welded to the cover before the cover is installed.  This tab is what ties the truss system to the cover itself.

The size of the link tab platform is 4 1/2" x 10".  The distance from the link mount platform to the centerline of the axle tube is 6".

Laser cut from 1/2" thick carbon steel plate, the truss body is heavy enough for any amount of horsepower.  It is attached to a 3/8" steel flange that ties the diff cover to the truss body with 1/2" hardware.

Truss hardware not included (diff cover hardware is included).  You will need to provide (3) 1/2" bolts and nuts.  Shipped bare of paint so you can weld it on, place your link tabs, and weld it all up.

Product Details
UCF057
Reviews

Write your review

UCF Dana 44 Rear Truss System

UCF Dana 44 Rear Truss System

Save hours of time building your custom 4-link suspension

Write your review
10 other products in the same category:

Follow us on Facebook