Banner
619620083784
Protect the underside of your '07-Present Jeep JK with the high-clearance armor from UCF!
The UCF '07-'18 JK Transfer Case Skid is laser cut from 3/16" (or 1/4") carbon steel plate.
The 3/16" skid plate weighs only 45lbs (or 60lbs for 1/4") and provides much more protection than the stock piece. Its reinforced along the back and inboard edge to maintain rigidity so that it can support the entire weight of the Jeep.
The mount at the fuel tank is recessed to allow a smooth transition off the skid at the back. Button head bolts maintain a smooth bottom surface and prevent snagging on rocks and limbs. We cover the exposed area of the fuel tank with our transfer case skid to provide greater protection than stock. We have located drain holes in the 4 corners of the enclosed area so that sand and debris can be washed out with a water S
Steel transfer case skids will be shipped bare of any finish and will require painting or powder-coating by the installer.
Specific References
Reference: UCF059
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF010
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Reference: UCF061
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Reference: UCF078
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF077
Brand: Under Cover Fabworks
UCF's custom-configurable system to provide full under-belly coverage
Reference: UCF037
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Protect the underside of your '07-Present Jeep JK with the high-clearance armor from UCF!
