Banner
619620083722
Protect your transfer case from trail damage with this heavy-duty skid plate
HD Transfer Case Skid Plate for '97-'02 Jeep Wrangler TJ (No Body-Lift Req'd)(6061-T6 Aluminum)
Fits '97-'02 Jeep Wrangler TJs with standard or automatic transmissions.
Fabricated from 1/4" thick 6061-T6 Aluminum plate (or upgrade to 3/8" thick 6061-T6 Aluminum plate). The parts were designed in 3D CAD software and laser cut then bent on a CNC press brake for a perfect fit every time.
The UCF Transfer Case Skid Plate is reinforced in the middle of the skid from one side to the other with a stiffening channel/transmission mount. The front and rear edges are ramped to increase strength and aid in sliding over obstacles. This product will increase ground clearance by about 2" over the factory skid plate. The total height of this system is about 2".
No Body-Lift Required to run this skid. Shipped UPS in bare aluminum.
Mounting hardware not included. '97-'02 TJs will require (6) 1 1/2" long x 1/2"-13tpi hex bolts with flat washers.
Specific References
Reference: UCF059
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF041
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Reference: UCF077
Brand: Under Cover Fabworks
UCF's custom-configurable system to provide full under-belly coverage
Reference: UCF078
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF060
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Protect your transfer case from trail damage with this heavy-duty skid plate
