Banner
619620083746
Protect your transfer case from trail damage with this heavy-duty skid plate
HD Transfer Case Skid Plate for '03-'06 Jeep Wrangler TJ/LJ (No Body-Lift Req'd)(6061-T6 Aluminum)
Fits '03-'06 Jeep Wrangler TJs and LJ Unlimiteds with standard or automatic transmissions.
Fabricated from 1/4" thick 6061-T6 Aluminum plate (or upgrade to 3/8" thick 6061-T6 Aluminum plate). The parts were designed in 3D CAD software and laser cut then bent on a CNC press brake for a perfect fit every time.
The UCF Transfer Case Skid Plate is reinforced in the middle of the skid from one side to the other with a stiffening channel/transmission mount. The front and rear edges are ramped to increase strength and aid in sliding over obstacles. This product will increase ground clearance by 1 1/2" over the factory skid plate. The total height of this system is about 3".
No Body-lift Required to run this skid. Shipped UPS in bare aluminum
You will reuse the factory mounting hardware.
Specific References
Reference: UCF026
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Reference: UCF078
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF059
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF077
Brand: Under Cover Fabworks
UCF's custom-configurable system to provide full under-belly coverage
Reference: UCF060
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Protect your transfer case from trail damage with this heavy-duty skid plate
