![](https://undercoverfab.com/962-large_default/ucf-transfer-case-skid-for-97-02-tj-ultra-high-clearance6061-t6-alum.jpg)
Reference: UCF051
Brand: Under Cover Fabworks
UCF Transfer Case Skid for '03-'06 TJ/LJ (Ultra High-Clearance)(6061-T6 Alum)
Protect your transfer case from trail damage with this heavy-duty skid plate
Banner
619620083814
Protect your transfer case from trail damage with this heavy-duty skid plate
HD Transfer Case Skid Plate for '97-'02 Jeep Wrangler TJ (Ultra High-Clearance)(6061-T6 Aluminum)
Fits '97-'02 Jeep Wrangler TJs with standard or automatic transmissions.
Fabricated from 1/4" thick 6061-T6 Aluminum plate (or upgrade to 3/8" thick 6061-T6 Aluminum plate). The parts were designed in 3D CAD software and laser cut then bent on a CNC press brake for a perfect fit every time.
The UCF Transfer Case Skid Plate is reinforced in the middle of the skid from one side to the other with a stiffening channel/transmission mount. The front and rear edges are ramped to increase strength and aid in sliding over obstacles. This product will increase ground clearance by about 3" over the factory skid plate. The total height of this system is about 1".
We recommend that you have at least 1" of body lift OR a UCF LOPRO Mount to install this skid plate with no body/transfer case vibration issues. It can also be installed without a body lift if you clearance the tub in area where the transfer case would normally touch. Shipped UPS in bare aluminum.
Mounting hardware not included. '97-'02 TJs will require (6) 1 1/2" long x 1/2"-13tpi hex bolts with flat washers.
Reference: UCF051
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Reference: UCF065
Brand: Under Cover Fabworks
Protect your transfer case from trail damage with this heavy-duty skid plate
Reference: UCF059
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF077
Brand: Under Cover Fabworks
UCF's custom-configurable system to provide full under-belly coverage
Reference: UCF078
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF645
Brand: Under Cover Fabworks
Replacement Flat Bushing for the UCF LOPRO Mount
Reference: UCF072
Brand: Under Cover Fabworks
Replacement Round Bushing for the UCF LOPRO Mount
Reference: UCF062
Brand: Under Cover Fabworks
Keep you engine oil pan and transmisison safely out of the rocks without weighing down your rig
Reference: UCF612
Brand: Under Cover Fabworks
Show support for UCF at the next local ride
Reference: UCF078
Brand: Under Cover Fabworks
Move your transfer case down into your skid plate to reduce driveline angles or allow you to install a TT without a body lift.
Reference: UCF115
Brand: Under Cover Fabworks
Replace those beat up rock anchors with a high-clearance body mount system that glides over the rocks with the "greatest of ease".
Reference: UCF102
Brand: Under Cover Fabworks
Space that skid plate down to remove vibrations or temporarily use spacers with a high-clearance skid plate to save money now.
Reference: SK2XC
Brand: Novak Conversions
Our goal at Novak was to simplify the shifting mechanism, at first for our many customers performing engine and transmission conversions, but then for the many running stock powertrains unhappy with the shifting action, and the many situations where the complex linkage causes the transfer case to pop out of its range or mode unexpectedly.
Protect your transfer case from trail damage with this heavy-duty skid plate