UCF Jeep TJ Steel Ultra-High Clearance Front Bumper

The Jeep TJ Ultra-High Clearance Front Bumper will gain you inches of clearance on your approach.  It is fabricated from 3/16" carbon steel plate and fully welded and sanded for a smooth appearance. 

This bumper mounts to the bottom of the frame in the factory location.  It bolts to the top of the frame with (4) bolts, (2) of which are the factory anti-sway bar bushing bolts. 

You can add several options to customize the bumper to your own needs.  These options include 3/4" thick d-ring mounts, a 1 3/4" x .120" wall DOM winch protection hoop and a 3/16" thick steel bolt-on fairlead mount.  The bumper weighs just under 28 lbs with no optional equipment.  It will ship bare of any finishes. 

This bumper will not allow you to use the factory anti-sway bar or any aftermarket piece that mounts in that location.  It is intended to be used with an anti-sway bar that mounts through the front crossmember such as the Currie Anti-Rock.