Reference: UCF147
Brand: Under Cover Fabworks
UCF Long Flat Bottom Tab
A 6" long, 5/16" steel link tab for flat mounting surfaces.
619620082626
Replace those weak, bent-up factory lower control arm mounts with something beefy.
Don't get stranded by a torn-off control arm mount.
The axle-side lower control arm mount is usually the first part of the factory suspension to go. It rips off the axle on the trail and strands you at the worst possible time. These fully boxed replacements weld to your Dana 30 or Dana 44 front axle.
What's included: one pair, enough to do a whole axle.
Finish: ships bare of paint, ready to weld onto your project.
Fitment: confirmed vehicles
Fits these axles: Dana 30 front, Dana 44.
For Dana 30 and Dana 44 front axles. Does not fit the JK (larger lower control arm bolt).
Not sure what fits your project? Choose your vehicle in the parts finder at the top of the page, or give us a call.
Reference: UCF147
Brand: Under Cover Fabworks
A 6" long, 5/16" steel link tab for flat mounting surfaces.
Reference: UCF436
Brand: Under Cover Fabworks
An axle-side upper link mount with a 0 degree angle, for a 3-link front or a parallel 4-link rear.
Reference: UCF142
Brand: Under Cover Fabworks
A chassis-side mounting system for the lower links of your four-link.
Reference: UCF144
Brand: Under Cover Fabworks
Mount your upper links to the inside of your frame rails, and drop a link without pulling the rear bolt.
Reference: UCF080
Brand: Under Cover Fabworks
A 3 3/4" long, 5/16" steel link tab for flat surfaces and UCF truss systems.
Reference: UCF143
Brand: Under Cover Fabworks
A complete chassis-side mounting system for the rear upper and lower links of your four-link.
Reference: UCF141
Brand: Under Cover Fabworks
A chassis-side lower link mount for a triangulated four-link with 1 1/4" heims or flex joints.
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper control arm mount with this beast.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
UCF Heavy-Duty Lower Control Arm Mounts for Jeep TJ, LJ & XJ (No Cam-Bolt Slot)
Replace those weak, bent-up factory lower control arm mounts with something beefy.
* Required fields
Review sent
Your review cannot be sent
Replace those weak, bent-up factory lower control arm mounts with something beefy.