Banner
619620082787
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes. It will plumb in-line with your rear brake hydraulic line and let you use the factory emergency brake handle as a line lock. It was designed for use with "Wilwood 260-6089 .750" Bore Compact Master Cylinder" but it may work with others. The bracket kit will ship welded but bare of any finish. It is attached to the bottom of the tub with factory hardware. You must supply pivot hardware and the hardware to attach the master cylinder.
Reference: UCF250
Brand: Under Cover Fabworks
Replace those weak, sagging hinges with new HD pivots from UCF!
Reference: UCF521
Brand: Under Cover Fabworks
Protect the stock axle ends from bending in the harsh conditions you would see when rock crawling or desert racing.
Reference: UCF649
Brand: Under Cover Fabworks
Our new heavy duty tailgate hinges completely replace the factory hinges with upgraded units. These are bushed with Delrin bushings that will provide many years of maintenance free service. No greasing required.
Reference: UCF164
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF078
Brand: Under Cover Fabworks
Adjust the height of your LOPRO mount to accommodate custom transfer case skid installs.
Reference: UCF670
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF529
Brand: Under Cover Fabworks
Replace those weak, sagging hinges with new HD pivots from UCF!
Reference: UCF669
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF633
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF679
Brand: Under Cover Fabworks
These replacement parts can be used with our trail doors or to adapt other trail doors for your upper windows.
Reference: UCF145
Brand: Under Cover Fabworks
Order your ARB Compressor Bracket for Jeep JK today and move that compressor to its most suitable location
Reference: UCF629
Brand: Under Cover Fabworks
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
Reference: UCF634
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF632
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF449
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF650
Brand: Under Cover Fabworks
Our new Jeep JL Heavy-Duty Tire Carrier Bracket will safely support a 37 or 38" tire on a 17" plus diameter wheel.
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
