Banner
619620082787
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes. It will plumb in-line with your rear brake hydraulic line and let you use the factory emergency brake handle as a line lock. It was designed for use with "Wilwood 260-6089 .750" Bore Compact Master Cylinder" but it may work with others. The bracket kit will ship welded but bare of any finish. It is attached to the bottom of the tub with factory hardware. You must supply pivot hardware and the hardware to attach the master cylinder.
Reference: UCF633
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF529
Brand: Under Cover Fabworks
Replace those weak, sagging hinges with new HD pivots from UCF!
Reference: UCF437
Brand: Under Cover Fabworks
Dress-up your QD steering wheel conversion with this aluminum cover plate!
Reference: UCF649
Brand: Under Cover Fabworks
Our new heavy duty tailgate hinges completely replace the factory hinges with upgraded units. These are bushed with Delrin bushings that will provide many years of maintenance free service. No greasing required.
Reference: UCF042
Brand: Under Cover Fabworks
Our Pinion Guard will save your yoke time and again
Reference: UCF635
Brand: Under Cover Fabworks
Make a cage tube removable with these flanges!
Reference: UCF646
Brand: Under Cover Fabworks
Lose your engine skid hardware kit or purchase a used skid without the hardware?
Reference: UCF539
Brand: Under Cover Fabworks
Relocate your factory locker pumps to a UCF transfer case skid plate with this bracket.
Reference: UCF571
Brand: Under Cover Fabworks
The UCF Optima Battery Box will keep your battery secure and keep you safe.
Reference: UCF164
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF078
Brand: Under Cover Fabworks
Adjust the height of your LOPRO mount to accommodate custom transfer case skid installs.
Reference: UCF670
Brand: Under Cover Fabworks
These aluminum hinges can be used to fabricate your own trail doors or to replace lost parts.
Reference: UCF629
Brand: Under Cover Fabworks
Mount a winch to any flat surface with this heavy-duty fairlead bracket.
Reference: UCF449
Brand: Under Cover Fabworks
Move your license plate off the corner of the Jeep to keep it safe.
Reference: UCF576
Brand: Under Cover Fabworks
We are happy to introduce a new product to help protect the upper fill-port on ORI STX Struts. This part is fabricated from 16 gauge steel plate and is designed to attach securely to the top of the strut with a stainless steel band clamp. It fits tightly to the top of the strut to prevent any rotation which could damage the fitting.
Reference: UCF480
Brand: Under Cover Fabworks
UCF Trailer Stake Pocket D-Rings are a versatile way to strap a load.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
The Jeep TJ Parking Brake Bracket Kit was designed to mount a Wilwood master cylinder in place of the factory e-brake bracket on the TJ. This is very helpful in performing axle swaps with rear disk brakes.
