Banner
619620082442
Replace that bent passenger front upper CA mount with this beast.
The UCF Passenger Front Upper Control Arm Mount for TJ Dana 30/44 is fabricated from 3/16" carbon steel plate. It is laser-cut and bent on a CNC brake for very high precision. The pieces form a very strong box-section that is gusseted to the sides with a third piece that passes through the center. The factory control arm bushing presses into our bracket. This part requires cutting, grindind and welding to complete the install.
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF436
Brand: Under Cover Fabworks
Simplify your link suspension build with our line of ready-made link mounting brackets!
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Reference: UCF024
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF141
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF144
Brand: Under Cover Fabworks
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF152
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF147
Brand: Under Cover Fabworks
Link Mounts for Flat Surfaces
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Replace that bent passenger front upper CA mount with this beast.
