
Reference: UCF477
Brand: Under Cover Fabworks
UCF TJ Upper-Link Inner Frame Brackets
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Banner
619620082633
Replace those weak and bent-up factory LCA mounts with something beefy
HD Lower Control Arm Mounts for Jeep TJ, LJ, XJ & JK for Dana 30 & Dana 44 UCF is now offering replacement axle-side lower control arm mounts for Jeep TJ, LJ & XJ vehicles. This is the part of the factory suspension that's usually first to go. They rip-off the axle on the trail and strand you at the worst possible time. Our lower control arm mounts are fabricated from 3/16" carbon steel plate and ship bare of paint and ready to weld onto your rig. The material is doubled up on the sides to give you a total thickness of 3/8". They accomodate the use of the factory cam-bolts. Sold in pairs, enough to do a whole axle. This may be the strongest replacement lower control arm mount in existance. Other companies use flimsy horse-shoe shaped tabs to hold the cam bolts steady (where all the force is really transfered in a hard brake or acceleration in 4WD). Our bracket is designed so that the cam bolt rests against the strongest part of the bracket; the part welded directly to the axle tube. Order a pair today.
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF011
Brand: Under Cover Fabworks
Replace those weak and bent-up factory LCA mounts with something beefy
Reference: UCF436
Brand: Under Cover Fabworks
Simplify your link suspension build with our line of ready-made link mounting brackets!
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF143
Brand: Under Cover Fabworks
Rear Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF142
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF149
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF456
Brand: Under Cover Fabworks
Mount longer coilovers using these offset mounts.
Replace those weak and bent-up factory LCA mounts with something beefy