![](https://undercoverfab.com/490-large_default/ucf-hd-lower-control-arm-mounts-for-jeep-tj-lj-xj-jk-no-cam-bolt-slot.jpg)
Reference: UCF423
Brand: Under Cover Fabworks
UCF Jeep TJ Rear Coil Spring Mounts
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Banner
619620082626
Replace those weak and bent-up factory LCA mounts with something beefy
HD Lower Control Arm Mounts for Jeep TJ, LJ, XJ & JK for Dana 30 & Dana 44 (Without Cam-Bolt Slot) UCF is now offering replacement axle-side lower control arm mounts for Jeep TJ, LJ & XJ vehicles. This is the part of the factory suspension that's usually first to go. They rip-off the axle on the trail and strand you at the worst possible time. These lower control arm mounts are fabricated from 1/4" carbon steel plate and ship bare of paint and ready to weld onto your rig. This fully-boxed design requires the use of adjustable control arms to set caster. Sold in pairs, enough to do a whole axle. Order a pair today.
Reference: UCF423
Brand: Under Cover Fabworks
These coil spring mounts will allow you to mount TJ rear springs on any vehicle with a 2.5" wide frame rail.
Reference: UCF143
Brand: Under Cover Fabworks
Rear Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF141
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF110
Brand: Under Cover Fabworks
Correct suspension geometry, improve ground clearance, and avoid skid plate modifications with our long-arm bracket kit.
Reference: UCF157
Brand: Under Cover Fabworks
Lower Chassis-Side Link Mounting System for Triangulated Four-Link
Reference: UCF456
Brand: Under Cover Fabworks
Mount longer coilovers using these offset mounts.
Reference: UCF144
Brand: Under Cover Fabworks
Upper Chassis-Side Link Mounting System for Four-Link Suspension
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Reference: UCF654
Brand: Under Cover Fabworks
These beefy tabs are designed to be a bombproof link attachment point for your tube chassis.
Reference: UCF132
Brand: Under Cover Fabworks
Protect your axle brackets from being mangled by rocks.
Reference: UCF149
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF151
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF148
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF150
Brand: Under Cover Fabworks
Coil-Over Shock Mounting Solutions
Reference: UCF156
Brand: Under Cover Fabworks
Strengthen that HP 30 housing!
Reference: UCF133
Brand: Under Cover Fabworks
Replace that bent passenger front upper CA mount with this beast.
Reference: SK3X-R
Brand: Novak Conversions
Our goal at Novak was to simplify the shifting mechanism, at first for our many customers performing engine and transmission conversions, but then for the many running stock powertrains unhappy with the shifting action, and the many situations where the complex linkage causes the transfer case to pop out of its range or mode unexpectedly.
Reference: UCF477
Brand: Under Cover Fabworks
Jeep TJ Frame-Side Rear Upper Control Arm Mounts
Replace those weak and bent-up factory LCA mounts with something beefy